| Technical specifications - FlyFiber® 20W |
| LASER |
| CW Output power |
20 W |
| Pulse energy |
1mJ |
| Solid state laser |
Pulsed active Ytterbium Fiber |
| Cooling |
Integrated, Air to Air |
| Beam quality |
M2 < 1,5 |
| Pulse frequency |
20-100Khz |
| Aiming Beam for marking preview |
650 nm Red Diode |
| SCANNER |
| Mirror aperture |
8mm o 10mm |
| Marking Speed |
600 characters/s |
| Accuracy |
2μm |
Fiber 20W Pulsed and CW (also available in 30, 50, 100, 200 watts for high speed marking, welding, cutting, and deep engraving)
Technology
FiberFly is the ultimate solution for precision marking and micro-processing of all
types of metals and plastics. Extremely compact, modular and perfectly sealed,
it is configured for easy integration into any industrial production line. The
FiberFly system offers the perfect combination of reduced operating costs and
high throughput.
Technical informations
MAINTENANCE FREE - The expected diode life of a fiber laser is in excess of
100.000 hours. A 2 year warranty is standard due to its extended reliability. 5
year warranties can be purchased as well.
LASER MODULE - Compact, 90° adjustable, with an ultra-fast scanning unit. Several laser controls (i.e. laser OK, oscillator failure, alarm reflected
radiation…) including real time measurement of the emitted power.
CONTROL MODULE - It contains the Laser Generator, the Power Supply and the
Server in a stainless steel 3U 19” rack. The POWER SUPPLY is protected
against interferences and impulsive signals. The SERVER unit, for the control of
the laser marking system is connected to the company network or to the client
PC through a 100Mbit/s TPC/IP communication. There is an industrial 26pin
round connector available to directly connect the start/stop signals, the marking
light and the encoder signals if marking on fly is required.
The server unit which controls the laser marking system is connected to the
company network.
DUST PROTECTION FAN FILTER is provided on the front panel of the Control
Module so that the laser can easily be used in harsh industrial environments with
oil and dust contaminants.
FLY CONNECTOR - A 25 mm diameter stainless steel connection between the
laser and the diode module provides increased protection of the fiber and the
cables. This design eliminates the risk of accidental breakage of the fiber. It also
provides extra protection against electromagnetic interferences and electrostatic
discharges
ABILITY TO INTEGRATE UP TO 8 MOTORS - The motor system is based on
servo/stepper motors with encoder feedback and supports the use of a
JOYSTICK for easy and very quick positioning of the parts to be marked. The
interface is a RS485 Bus.
LASER OPERATIVE SOFTWARE FlyX (ActiveX) and MotorX (ActiveX) provided for users that prefer to build their own application. FlyCAD for a system with complete software, for immediate use where all the more advanced functions have already been implemented.
