| Technical specifications - FlyMAX® 20W |
| LASER |
| Wavelenght |
@ 1.064 nm |
| Nominal power (W) |
20W |
| Marking area |
from ø 80 to ø 360 |
| Q-switch mode |
100-50.000 Hz |
| Aiming Beam |
Red diode |
| Diode Estimated Life |
8.000 h |
| Operating Temperature (°C) |
+15 ÷ 40 |
| Cooling |
Closed loop or Water/Water |
| Operating system |
Windows®XP |
| Application software |
FlyCAD |
| Laser Group dimensions (LxWxH mm) |
200x225x450mm |
| Box dimensions (LxWxH mm) |
383x524x562mm |
FLY is the smallest DPSS laser module available on the market.
The unique modular concept is configured for easy integration into any industrial
production line. A distinct benefit is that the FLY has an open architecture with
two microprocessor sub-systems. These sub-systems provide real time control
and work independently of the server while also maintaining the critical functions
of the system, i.e. the diodes and the cooling unit. FLY’s design concept allows
integration into a production line by easily interfacing to an existing PLC system.
Communication is by RS232 or TCP/IP that utilizes the Client/Server concept or
by digital signals (Start-Stop/Fault/Marking in progress).
Fly's Advanced Modular Structure
EASY MAINTENANCE: either of the two system modules can be interchanged
by simply unplugging the units for replacement. This eliminates mistakes and the
need to disconnect cables, brackets, etc.
SMART CONNECTOR:The Laser and the Control Box are connected with one connector.
INTERCHANGEABLE:The substitution of the power supply module and of the laser-cartridge allows the user to transform the FLY to an IR diode laser of 20-50-70W or to a Green laser.
Description
LASER - Fly has an excellent beam quality together with a very high marking
speed. It has been completely manufactured with stainless steel to ensure a
very long life even in the most demanding environments. The laser module has
been designed with an accurate Finite Element Analysis (FEA) to achieve a rigid
and stable structure of very low weight, without loss of rigidity.
BOX - The chiller unit has a cooling capacity of 1500W in spite of its extremely
compact dimensions. A digital regulator stabilizes the fluid temperature in a
range of a few tenths of a degree, insuring a stabile laser operation in all
conditions. To insure that the laser works properly in extreme hot environments
(with room temperatures higher than 40°C), the cooling unit is equipped with a
very powerful fan whose speed is electronically controlled using particular
transducers that measure the gas pressure in the cooling unit. This reduces the
noise to a minimum in normal environmental conditions.
CONTROL - For complete control of FLY and of the commands received by the
operator, 37 important parameters of the laser marking are measured 3 times
every second and saved in a log database. Moreover all the external events of
the laser requested by the operator or by the production line and relating to the
motors (if installed) are recorded and saved.
SOFTWARE FLY (depending to the software installed) is a laser marking system ready to be used with FlyCAD software or an OEM Laser component to be integrated into a Class I laser or a more complex automated multi axis system FlyX
