| Technical specification - FlyAir® 10W |
| LASER |
| CW Output power |
12 W |
| Wavelenght |
1064 nm |
| Beam quality |
M2 < 1.4 |
| Q-switch frequency |
10-100 kHz in Q-switch |
| Marking exitation |
by laser diode 808 nm |
| Aiming beam for marking preview |
635 nm Red Diode |
| Cooling |
Integrated, Air to Air |
FlyAir is the ultimate solution for precision marking on all types of
metals and plastics.
Extremely compact, modular and perfectly sealed, it is
configured for easy integration into any industrial production line or any of our
workstations. The FlyAir system offers the perfect combination of reduced
operating costs and high throughput.
FlyAir’s design concept allows integration
into a production line by easily interfacing to an existing PLC system.
Communication is by RS232 or TCP/IP that utilizes the Client/Server concept or
by digital signals (Start-Stop, Fault, Marking in Progress). Depending on the
software installed Fly Air is a laser marking system ready to use as is, or a
component to be integrated into a Class I laser workstation, a factory line, or a
more complex system.
The laser is available both as an OEM laser or can be
integrated into a fully customizable turnkey marking workstation with Class I
enclosures. Systems range from small portable desktop systems to more
complex multi axis, automated workstations.
Beam quality
The study and the optimization of the laser beam have been
carefully adapted to achieve an excellent beam quality – constant at any power
and at any frequency – with very high marking speeds. Extensive R & D has
lead to a Gaussian profile with the highest beam quality (Tem00).
Flyair's advanced modular structure
POWER SUPPLY MODULE: The power supply module is designed to
guarantee a longer life of the diode – also in anomalous situations. Fly Air offers
protection against over-voltage or line drops. The built in LED’s located on the
front panel provide immediate system status feedback and a 230 V plug is also
available for servo/stepper motor's power supply.
DIODE MODULE: integrates the temperature and the current control systems,
the hour-counter, the electronic serial number and the fan speed regulation. The
modular design allows for immediate replacement (unplug and plug in) with no
technical expertise required.
LASER MODULE:
• Provides a Scanning Unit with optional 8 or 10 mm mirrors to fit your specific application and required speed.
• A special assembly allows for instant changeover of the Scanning Unit and no
realignment is necessary. Provides rotation of the scanning head from -90/0/+90
degrees for marking of parts on different angles.
• Two red laser diodes (pointers) are integrated into the Scanning Head and
when the laser is at the correct focus distance the two beams coincide. This
allows the user to easily achieve the correct focus distance without any external
tools, both on simple flat and curved parts and on parts with complex
geometries.
• The Laser Head and all systems are completely sealed, pre-aligned and
assembled in a Clean Room, and do not require any maintenance. Pumping and
emitting power measurements in real time allow for complete and continuous control of the laser parameters.
• Server Unit for the control of laser marking system. The server is connected to
the company network or to the client PC through 100Mbit/s TPC/IP network
communication. An industrial 26pin round connector is available to directly
connect the start/stop signals, the marking warning light and the encoder signals
if marking on fly is used.
FLY CONNECTOR: A 25 mm diameter stainless steel connection between the
laser and the diode module provides for increased protection of the fiber and the
cables. This design eliminates the risk of accidental breakage of the fiber. It also
provides extra protection against electromagnetic interferences and electrostatic
discharges.
